Metal Drain Pan is a seamless, nestable, metal drain pan, with rolled edges. The ultimate in drain pan design, tailored for easy distribution and installation.
The Seamless Metal Drain Pan is full of thoughtful features to make life easier on both the distributor and the contractor. The stout metal construction is backed up by rolled edges on all sides without any seams for maximum safety and integrity. These pans are nestable as well -- a stack of 70 pans is only a foot high!
Once at the site, there are no worries of having to return to the distributor for missing parts. The fittings are conveniently packaged with the pan for simple and efficient installation. Choose between two possible drain outlet positions and install with confidence.
| Seamless | The seamless design of DiversiTech metal drain pans virtually eliminates leaks from seams and folded corners found in conventional metal drain pans. |
|---|---|
| Nestable | Because DiversiTech drain pans are nestable, there is a tremendous decrease in volume needed to store and transport metal drain pans. A stack of seventy DiversiTech metal drain pans is only 12” high. Therefore, seventy DiversiTech pans fit in the same space as six conventional 2” deep non-nesting drain pans! |
| Single Piece Design | The DiversiTech metal drain pan is stamped from a single sheet of 26 gauge galvanized steel which prevents leaks. |
| Rolled Edge | The rolled edge virtually eliminates hand injuries during handling. |
| Two Outlets | Easy, flexible installation with an outlet on both the long and short side of the pan — no need to cut an outlet if you have the wrong pan on the job. |
| Fittings Included | Get everything you need for the installation of the pan in a single package. Fittings are included with DiversiTech metal drain pans. |