Zinc-Plated Bridle Rings are a good support for communications cable & other low voltage uses. They are available as Bolt-On, commonly used with Beam Clamps, and as Screw-In, commonly used with Wooden Beams. The Cable Support Bridle Rings with saddle are a cost-effective alternative to expensive cable tray. Their wide surface saddle provides support without stress for Category 5, fiber-optic, and other sensitive voice/Datacom cables.
Item Number | Item Description | Primary UOM | Order Multiple |
---|---|---|---|
18058 | Cable Support Bridle Rings with Saddle 2" | EA | 50 |
18421 | Bridle Rings - Bolt-On - 1-1/2" Diameter | EA | 100 |
18422 | Bridle Rings - Bolt-On - 2" Diameter | EA | 100 |
18425 | Bridle Rings - Screw-In - 1" Diameter | EA | 100 |
18426 | Bridle Rings - Screw-In - 1-1/2" Diameter | EA | 100 |
18427 | Bridle Rings - Screw-In - 2" Diameter | EA | 100 |
18060 | Cable Support Bridle Rings with Saddle 4" | EA | 50 |
Item Number | Item Description | Primary UOM | Order Multiple |
---|---|---|---|
18058 | Cable Support Bridle Rings with Saddle 2" | EA | 50 |
18421 | Bridle Rings - Bolt-On - 1-1/2" Diameter | EA | 100 |
18422 | Bridle Rings - Bolt-On - 2" Diameter | EA | 100 |
18425 | Bridle Rings - Screw-In - 1" Diameter | EA | 100 |
18426 | Bridle Rings - Screw-In - 1-1/2" Diameter | EA | 100 |
18427 | Bridle Rings - Screw-In - 2" Diameter | EA | 100 |
18060 | Cable Support Bridle Rings with Saddle 4" | EA | 50 |
2" J Hooks for Datacom applications are a cost-effective alternative to expensive cable tray. Their wide base provides support without stress for Cat5, fiber-optic, other sensitive voice/Datacom cables. The continuous wide base radius supports the natural curve of cables and ensures eliminating kinks & bending. A cable wire retainer is supplied with every part. Its unique design eliminates the need for an attachment plate when stacked. These J-Hooks can be attached to a wide variety of structures using beam clamps, clips and many other components.
Item Number | Item Description | Primary UOM | Order Multiple |
---|---|---|---|
18056 | J Hooks Screw Mount - 2" | EA | 25 |
Item Number | Item Description | Primary UOM | Order Multiple |
---|---|---|---|
18056 | J Hooks Screw Mount - 2" | EA | 25 |
This Stabilizer for electrical boxes is made of pre-galvanized steel. The box support is designed to be screwed to 2-1/2", 3-1/2" & 4" wood or metal studs.
Item Number | Item Description | Primary UOM | Order Multiple |
---|---|---|---|
18052 | Box Stabilizer Support - 2-1/2", 3-1/2", 4" | EA | 100 |
18370 | Box Stabilizer Support - 2-1/2", 3-1/2" | EA | 100 |
Item Number | Item Description | Primary UOM | Order Multiple |
---|---|---|---|
18052 | Box Stabilizer Support - 2-1/2", 3-1/2", 4" | EA | 100 |
18370 | Box Stabilizer Support - 2-1/2", 3-1/2" | EA | 100 |
A Snap-On 24” span box hanger with dual height adjustment that allows flush or 3/4” offset mounting of boxes. It is produced of pre-galvanized steel with spring steel hardware and 1 BBC mounting clip with screw included.
Item Number | Item Description | Primary UOM | Order Multiple |
---|---|---|---|
18054 | Box to T Bar Fastener - 24" Long | EA | 50 |
Item Number | Item Description | Primary UOM | Order Multiple |
---|---|---|---|
18054 | Box to T Bar Fastener - 24" Long | EA | 50 |
This 2-piece T-Bar Scissor Clip mounts fixtures or boxes to a 1” T-bar. Includes a wing nut washer. Static Load Limit of 100 lbs.
Item Number | Item Description | Primary UOM | Order Multiple |
---|---|---|---|
18387 | T-Bar Scissor Clips - 2 Piece 5/8" Stud | EA | 50 |
Item Number | Item Description | Primary UOM | Order Multiple |
---|---|---|---|
18387 | T-Bar Scissor Clips - 2 Piece 5/8" Stud | EA | 50 |